LiveLife
Member
lauderdale, Jake emailed back and they have some 45ACP 185 gr and should be back on the website.
Will put an order in and thanks for the offer!
Will put an order in and thanks for the offer!
I got a Moe fixed stock like in the link for my 9MM AR and it works OK on the bags, but is shorter than I like. A fixed A2 is better IMHO, both from a length standpoint and how it rides the bag.I will order Magpul fixed stock like this for test carbines if CTR buttstocks are not steady enough for precision shooting - https://www.magpul.com/products/moe-...stock-mil-spec
In your first group, 124gr. RMR jhp--is 3.2 correct? should that be 4.2 which is closer to my load for 124gr RMR rn.
125 GR. HDY HAP W231/HP-38 COL 1.069" Start 2.8 gr (753 fps) 25,300 PSI - Max 3.3 gr (876 fps) 33,600 PSI
9mm Luger 124 gr JHP BE-86 OAL 1.120" Max 5.9 gr 1,175 fps
Yes, that was my "original" intent for the thread - to develop "plinking" carbine loads using cheap plated bullets and "mixed" range brass to replace 22LR plinking ammo.You want inexpensive reloads for "plinking" at reasonable ranges.
I think this is seriously over thinking things. You want inexpensive reloads for "plinking" at reasonable ranges. If your ammo is shooting 2 moa just choose targets that are 4-5 moa and just have fun! Don't over think it! Time is money too!