Let's see those Tactical rifles...

Status
Not open for further replies.

MDG1976

Member
Joined
Jul 8, 2005
Messages
522
Location
USA
Here's mine:
10FP003.gif
7b01bc5c.gif
Savage 10FP .308
B&C Medalist stock
Weaver Classic V 4-16 scope
Warne base & rings
Harris bipod
 
Mine, tactical on the cheap...

Savage 12FV, Super Sniper 10x, a roll of cammo tape, and a home made
cheek pad. Ugly, but shoots anyway, best group so far is .185", 100 yards.

308-1b.jpg

308-1c.jpg
 
I never understood how any Bolt Rifle could be tactical. Those are really cool, but I always thought that "tactical" was some rail clad semi-auto carbine.

Although there are a number of bolt action rifles that have tactical in the name.
 
Here's the "Tactical Trio":

Short range: RRA LAR-15



Medium range: SA M1A, HRA USGI everything



Long range: Savage 10FP, Super Sniper 10x, B&C stock



S/F

Farnham
 
JP CTR-02 with TA11F ACOG in LaRue mount:
AR_4-blur-crop-600.jpg


Armalite AR-30 .338 Lapua Mag with Shepherd V1 6-18x40mm.
17-s.jpg


Barrett M82A1 .50BMG with Nightforce NSX 5.5-22x56mm
M82A1-4.jpg
 
Savage 12FV, Super Sniper 10x, a roll of cammo tape, and a home made
cheek pad. Ugly, but shoots anyway, best group so far is .185", 100 yards
I like that; and circa .200" @100yds is much more than all the practical accuracy needed for any reasonable task.

I wouldn't go as far to say ugly either; it looks all business to me.
-------------------------------------------------------

http://ussliberty.org
http://ssunitedstates.org
 
LAK said:
I like that; and circa .200" @100yds is much more than all the practical accuracy needed for any reasonable task.

I wouldn't go as far to say ugly either; it looks all business to me.


Thanks, I am more than happy with the way it shoots, and your right, it is
pretty much all business.

Spudz:)
 
Long range:
FN PBR rifle in .308 with Leupold 4.5-14 scope and Harris bi-pod
FNPBR.jpg

Bushmaster AR-10 .308 with Leupold 6.5-20 LR scope
AR-10PIC2.gif

medium to close range:
Bushmaster M-4 .223 with holosight foregrip and laser
m4pic.gif

SAR-1 AK-47 7.62x39 with holosight and 12mw green laser
SAR1withlaser.jpg

Up close and personal:
Thompson Commando .45acp
Thompson.gif
 
Last edited:
FN SPR 26" barrel in .308
McMillan A-5 stock
Williams one-piece steel bottom metal
Badger bolt knob
Badger rail
Badger rings
Leupold 3.5-10x40LR M3 Scope with PR Gen 2 Mildot
Piller bedded
Trigger lightened
Smithing done by George Gardner at GAP Precision
fnsprnew1.jpg


Winchester Pushfeed Action
Krieger fluted SS MTU contour 26" barrel in .30-06
McMillan A-2 stock
Williams one-piece steel bottom metal
Badger rail
Badger rings
Leupold 6.5-20x50LR M1 Scope with Mildot
Piller bedded
Jewell Trigger
Tubbs Speed Lock firing pin and spring
Smithing done by Jack Krieger at Krieger Barrels
Win06t1.jpg


Winchester CRF Action
Obermeyer fluted SS MTU contour 28" barrel in 6.5x55
McMillan Prone stock
Williams one-piece steel bottom metal
Badger rail
TPS rings
Sightron 6-24x42 Scope
Piller bedded
Jewell Trigger
Tubbs Speed Lock firing pin and spring
Smithing done by Terry Cross at KMW
6.5Swede2A.jpg


Don
 
Nothing fancy.

Out to about 800 yards, Armscorp of Baltimore M14NM in 7.62mm NATO, HRA bits, Krieger barrel, ARMS #18 mount, Weaver V-16 scope, KillFlash ARD, NM reamed flash hider, USGI fiberglass stock, "Ambush" paint scheme, Devcon bedding:

m14nmbench.gif

800-1000 yards, Remington 700PSS in .308 Winchester, Shilen trigger, GreTan lightweight striker, ArmsTech mag extender, Devcon skim bedding, Sightron S-II 4-16x42 scope, KillFlash ARD, Leupole QRW mounts, bubble level:

700pssbenchirc.gif

1000-1200 yards, 1916 Haenel 98 Mauser in 6.5-06, Krieger barrel, Vais muzzle brake, Weaver V-16 scope, KillFlash ARD, Millett steel mount and rings, Canjar Trigger, Tubb Speedlock, Buehler safety, Devcon bedding, Fajen laminate stock, bubble level:

6.5-06matright.gif

Out to about 1000 yards, or as far as the 2.5x M-73 scope can resolve, March 1944 Z-prefix Remington 1903A4 restoration in .30-06, NOS March 1944 barrel, NOS 1903A4 bent bolt, NOS Redfield mount, NOS rings and Lyman Alaskan/M-73 scope w/post reticle, Boyd's repro walnut C-stock, Acra-Glas bedding (hidden), Timney Featherweight trigger (also hidden), match chamber cut via pull-through reamer, lugs and raceways lapped before parkerizing, mahogany stain, hand-rubbed linseed oil finish:

03a4bench.gif
 
Powers above, do you all know how lucky you are?

Some of those rifles are beautiful!

If i can ever get an extra stock for my Mini-14, i will have to do some interesting modification and see what sort of mess i can end up with.
 
Status
Not open for further replies.
Back
Top