Hi folks, I ended up with 3000 of these Berrys 9mm 115gr flat points in an estate purchase. My Dillon 650 is already set up with CFE so I was hoping to find a decent recipe for these. I load my 115gr V-crowns and 115gr Gold Dot's at 5.7gr and 1.120 OAL and they perform extremely well. Always have. I started the Berrys at 5.0gr and 1.085 on the OAL. Berry's called for 1.060 but wanted to start a bit longer. I had a couple that didn't eject properly and the top 1/4 of the case was black. I haven't found a lot of info on the flat points especially with CFE. There're probably better choices on powder, but CFE is what I have. Has anyone worked with the flat nose Berrys? Any input appreciated. Thank you.