Zerodefect
member
In order, with things they needed:
Dan Wesson Valor, 100% reliable but wouldn't allways lock the slide back when shot empty (mag problem). Switched to Tripp mags and Tripp rebuild kits in the stock magazine bodies to solve.
Glock 23, trigger springs and recoil springs. 100% except for a fail to fire solved by a tap rack bang, problem was a broken trigger spring
Glock 35, trigger springs and recoil springs. No real problems worth mentioning. Had a stove pipe, but that happens when you're shooting under a barricade with the ejection port pressed to the ground.
Ruger P95 recoil spring, magazine, polished ramp to solve FTRTB. Likes +P ammo best. Recoil spring is kinda soft.
Kahr P380 magazine plates needed crimped tighter to keep from falling off and ejecting my ammo all over isle 3 at the grocery store. Likes only hotter Corbon defensive ammo, not so reliable with cheap WWB.
Kimber CDP Multiple FTRTB. Piss poor magazines ate a chunk out of my frame and allmost damaged my feed ramps. Needed Wilson mags, Wolff recoil spring, and a little smoothing of the outside barrel finish. Polished ramp and throat of barrel. Removed Series II FP safety. It's now very reliable.
The other pistols I've owned aren't worth mentioning in a reliability thread.
What I've learned:
The Glocks eat trigger springs, but maintain decent function when they do. Even when my trigger spring broke completely, they still reset and fired 95% of the time.
1911's come with crappy magazines.
1911's are very reliable if you know what your doing. If you treat your pistol like a shovel you're better off with a Glock.
The Glocks now eat trigger springs 5 times more often now that I'm using aftermarket extra strength trigger springs for a softer trigger pull. Now I change the spring ever 1000 rounds. Haven't had a single problem since.
Dan Wesson Valor, 100% reliable but wouldn't allways lock the slide back when shot empty (mag problem). Switched to Tripp mags and Tripp rebuild kits in the stock magazine bodies to solve.
Glock 23, trigger springs and recoil springs. 100% except for a fail to fire solved by a tap rack bang, problem was a broken trigger spring
Glock 35, trigger springs and recoil springs. No real problems worth mentioning. Had a stove pipe, but that happens when you're shooting under a barricade with the ejection port pressed to the ground.
Ruger P95 recoil spring, magazine, polished ramp to solve FTRTB. Likes +P ammo best. Recoil spring is kinda soft.
Kahr P380 magazine plates needed crimped tighter to keep from falling off and ejecting my ammo all over isle 3 at the grocery store. Likes only hotter Corbon defensive ammo, not so reliable with cheap WWB.
Kimber CDP Multiple FTRTB. Piss poor magazines ate a chunk out of my frame and allmost damaged my feed ramps. Needed Wilson mags, Wolff recoil spring, and a little smoothing of the outside barrel finish. Polished ramp and throat of barrel. Removed Series II FP safety. It's now very reliable.
The other pistols I've owned aren't worth mentioning in a reliability thread.
What I've learned:
The Glocks eat trigger springs, but maintain decent function when they do. Even when my trigger spring broke completely, they still reset and fired 95% of the time.
1911's come with crappy magazines.
1911's are very reliable if you know what your doing. If you treat your pistol like a shovel you're better off with a Glock.
The Glocks now eat trigger springs 5 times more often now that I'm using aftermarket extra strength trigger springs for a softer trigger pull. Now I change the spring ever 1000 rounds. Haven't had a single problem since.