RejectActual
Member
- Joined
- Apr 13, 2023
- Messages
- 4
New to reloading and I’m having issues with my dillon 750 xl reloading 9mm one thing after a another lately. Began reloading and had some success in the beginning until I decided to get a Mr. Bulletfeeder and it’s been downhill ever since. So originally had my stations set up as 3 powder check 4 MBF and 5 DAA seat/crimp die once I did that I was having a really hard time getting cases to pass my case gauge. So I ditched the powder check and went 3 bullet feeder 4 Dillon seating die 5 Dillon crimp die and put he original Dillon powder funnel in (that was a mistake) I noticed the wasp look to my cases and did not like the way that looked so I read up on it and swapped the Dillon crimp do he lee FCD and had a lot more success with passing my case gauge. After this I went to the range and had a couple squibs inspected my powder system and the powder bar was not operating correctly and was throwing very inconsistent loads very frustrating. So I reset the system back to 3 powder check 4 MBF and 5 DAA seat/crimp once again having very inconsistent case gauges one magtech case was so bad it got stuck in my G17 once I got it out I returned my 750 back to the Lee FCD on 5 and he Dillon seat die on 4 and ditched my MBF. I ran said case through the FCD and it actually passed my case gauge very impressed.
I would ultimately like to continue using my MBF but can’t seem to find a solution and help or advice would be greatly appreciated. Not exactly sure where I’m going wrong I’ve played with all the station and can’t get much consistency. I am loading mixed range brass but it’s all reputable stuff from what I’ve researched so no sure what’s going on.
I would ultimately like to continue using my MBF but can’t seem to find a solution and help or advice would be greatly appreciated. Not exactly sure where I’m going wrong I’ve played with all the station and can’t get much consistency. I am loading mixed range brass but it’s all reputable stuff from what I’ve researched so no sure what’s going on.