Quantcast
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

So who shoots the Ruger SR1911

Discussion in 'Handguns: Autoloaders' started by Queen_of_Thunder, Sep 20, 2013.

Thread Status:
Not open for further replies.
  1. Queen_of_Thunder

    Queen_of_Thunder member

    Joined:
    Jul 28, 2012
    Messages:
    1,881
    Location:
    Where God purifies the soul. The West Texas desert
    I almost bought one this morning. I was wondering if anyone has shot one of these. The one I was looking at had a 4 inch barrel and the other had a 5 inch barrel. Really looked like a nice set to have.
     
  2. Henryfan1

    Henryfan1 Member

    Joined:
    Aug 27, 2013
    Messages:
    58
    Its a well made gun. I personally like the plunger tube being integrally molded into the frame.
     
  3. Nebuchadnezzar

    Nebuchadnezzar Member

    Joined:
    Jun 14, 2010
    Messages:
    45
    Mine has about 200 rounds downrange from me and about as many from the previous owner. My brother in law has the 5" and his wife has the 4". Combined they have a few hundred rounds each. All three guns have been flawless. They rattle a little when you shake them but they feed and fire everything we have fed them so far. Pretty darn accurate too.

    If you have the 1911 itch Ruger's offering can help scratch it without spending too much coin. Several Colts, Kimbers, and even a LesBaer have passed through my collection. Currently two Colts and the Ruger 5" are what I keep around. Of the three the Ruger gets shot the most.
     
  4. Queen_of_Thunder

    Queen_of_Thunder member

    Joined:
    Jul 28, 2012
    Messages:
    1,881
    Location:
    Where God purifies the soul. The West Texas desert
    Well I have the 1911+Ruger 22 itch and Its not going away I'm afraid. I've been looking for some 1911's but missed some Kimbers at a local gun shop but one can't be everywhere at once so I went without. Hey you snooze you lose. What can I say.
     
  5. Nebuchadnezzar

    Nebuchadnezzar Member

    Joined:
    Jun 14, 2010
    Messages:
    45
    With Kimber, you snooze you won. :)

    But that's just based on my personal experience YMMV.

    The Ruger will make a great trouble free leap into the 1911 pool. 5" is the classic barrel length and is my preference, you should handle both and see which feels best to you.
     
  6. DaBruins

    DaBruins Member

    Joined:
    Nov 25, 2012
    Messages:
    83
    Location:
    CT
    I have both full size and commander SR1911's, and they are a joy to shoot. They are my first (and only) 45's so I can't compare them to anything else, but the full size has 500-600 rounds through it and the commander only has about 200 rounds, both without a single issue or problem.

    I also have a Kimber 9mm Ultra Carry II 1911 that has had it's share of problems, including one issue that required a 6 week visit to the factory when it was brand new. I bought it for cc, but it's become a range gun based on it's reliability (or lack thereof).
     
  7. Mike J

    Mike J Member

    Joined:
    Jul 3, 2007
    Messages:
    2,150
    Location:
    Georgia
    I bought my SR 1911 a couple of months ago. It is the full sized with the 5" barrel. I kinda wish I had gotten the commander sized one now as it would be easier to carry but I have other guns that get that duty most of the time anyway. I only have a couple hundred rounds through mine but so far it has been trouble free & I shoot it better than guns I have had longer. The ergonomics work well for me. If you want to research these you might want to dig around in the 1911 subforum at rugerforum.com or the ruger subforum at 1911forum.com
     
  8. juk

    juk Member

    Joined:
    Jun 22, 2008
    Messages:
    875
    Location:
    Alabammy
    I have the 5" SR1911. I have not fired a shot from it...yet. I found out a month after I bought it (NIB) that the hammer would fall without the grip safety being depressed. I put in a 5 minute phone call to Ruger and they sent me a prepaid shipping label. I dropped it off at UPS late last Friday and had an email from Ruger yesterday with a tracking number.

    One of the reasons I went with the Ruger was the warranty. I know that stuff happens sometimes, and wasn't worried a bit about sending the gun back to them. Chances are very high that the problem was in the main spring. I just called Ruger to ask them if I would void the warranty if I took it apart and bent that spring. They insisted that I send it in. LOL! I do love a company that stands behind their products, and Ruger will continue to get my business because they do exactly that.
     
  9. asia331

    asia331 Member

    Joined:
    Dec 25, 2010
    Messages:
    296
    Location:
    Arizona
    Have had a 5" SR1911 for over a year now,very rapidly promoted it to my EDC a few weeks after purchase & range eval and planning on purchasing a second. One of the sweetest 1911's I own and a great value for the money expended. Objectively has proven more functionally reliable that any of my Colts...and I still love my Colts.
     
    Last edited: Sep 21, 2013
  10. StrutStopper

    StrutStopper Member

    Joined:
    Jul 5, 2011
    Messages:
    633
    My full size SR1911 is my favorite range toy.
     
  11. txgunsuscg

    txgunsuscg Member

    Joined:
    Jan 1, 2011
    Messages:
    477
    Location:
    Chesapeake, VA
    Have the SR1911 Commander size. Good, solid gun. I carry it around the house and carried it some as EDC. It got replaced by my Lightweight Commander on weight alone.
     
  12. ID-shooting

    ID-shooting Member

    Joined:
    Dec 15, 2012
    Messages:
    643
    Location:
    Nampa, Idaho
    I have the full size. Love it. I shoot better than friends who have different, much more expensive brandsm Dan Wesson, Colt, Para Ord, Springfield. They even shoot better when the pick it up.

    Just shy of 1000 rounds and not one FTF, FTE. Not one.
     
  13. longhair75

    longhair75 Member

    Joined:
    Dec 3, 2008
    Messages:
    293
    Location:
    Nebraska
    My SR 1911 is 100% reliable, and a joy to shoot. I have about 1500 failure free rounds through it so far.
     
  14. horsemen61

    horsemen61 Member

    Joined:
    Oct 20, 2011
    Messages:
    3,399
    I am glad to hear the good news about the ruger because I am looking to get one.
     
  15. HarcyPervin

    HarcyPervin Member

    Joined:
    Dec 9, 2010
    Messages:
    490
    Location:
    Minnesnowta
    I'll echo what most have said.... I have it, I love it. It is a great buy for the money, yes there are better guns out there, but it seems to be a favorite among the under $800 group.
     
  16. atvalaska

    atvalaska Member

    Joined:
    Nov 1, 2008
    Messages:
    154
    Location:
    camp go 4 beer alaska
    I have a few hundred rounds thur my full size sr1911....great gun! had a p97 ...ok! p-90 with the houge grip ..great gun.....sr1911 :) hands down winner imo..
     
  17. snakeman

    snakeman Member

    Joined:
    May 20, 2008
    Messages:
    2,079
    Location:
    texas
    I really like my 5" (added pachmayr presentation grips, ordered reduced power mainsprings). I will be getting some adjustable target sights. It really has a lot of accuracy potential and with the weight of all the steel it's a real pussycat to shoot. Reliability has been top notch. In other words, you can't go wrong.
     
  18. handyman163

    handyman163 Member

    Joined:
    May 4, 2012
    Messages:
    19
    I've got between 2500 and 3000 rounds through mine since last April. It's the full-size. I fired 300 or 400 FMJ factory loads through it before switching to 200gr lead semi-wadcutters that I load. The only issues I've ever had was one range session, my 2 factory magazines (all I had at the time) were so gummed up with lead bullet lube from my reloads that I had some cycling failures, but cleaning the mags is all I did, and it's been 100% since. I absolutely love the Ruger SR1911.

    The only things I've done to it were to change the grip panels and adding the skateboard tape to the front strap for grip. The Hogue grips I tried were too fat and the Pearce finger grips that mount under the grip panels were nice, but still made the grip fatter than I liked. Similar to one post above, my grip safety was loose enough to rattle - wasn't unsafe but I removed the mainspring housing and pulled the grip safety spring leg out a bit to firm up the tension and that took care of it.
     

    Attached Files:

    Last edited: Sep 24, 2013
  19. JR24

    JR24 Member

    Joined:
    Aug 16, 2011
    Messages:
    627
    Location:
    The center of the mitt
    Almost picked up the Commander sized one a while back but the store was charging a stupid amount for it. Picked up a NIB Kimber Pro Carry II (which has been amazingly fantastic so far) for $60 more.

    I love the love the Ruger is gettin' as I still want to pick up the Gov't size once I find one for the "right" price.
     
  20. TimboKhan

    TimboKhan Moderator

    Joined:
    Apr 15, 2005
    Messages:
    8,084
    Location:
    Greeley, CO
    I could nor be more satisfied wirh my full size SR1911.

    sent from my Galaxy Note II.
     
  21. Foto Joe

    Foto Joe Member

    Joined:
    Jan 13, 2010
    Messages:
    1,378
    Location:
    Cody, WY
    A couple of years ago when Ruger first released the SR I wanted one so bad I could taste it. Unfortunately I think Ruger only made three of them that year so finding one didn't happen and it just made me like my S&W's more. One of these days I'll find a Commander size one and it'll go home with me though. The unfortunate part nowadays is that the gun shops are charging MSRP plus a BUNCH for these things.

    In my opinion they're a great gun, if you find one that isn't too far up on the price scale snatch it up, I don't think you'll be disappointed.
     
  22. HarcyPervin

    HarcyPervin Member

    Joined:
    Dec 9, 2010
    Messages:
    490
    Location:
    Minnesnowta
    I ordered 5 the day they were announced as a group-buy, we only got one or two...18 months later I found a lightly used one for $590. I'm very pleased with it, although I only have about 200 rounds through it.
     
  23. KTXdm9

    KTXdm9 Member

    Joined:
    Mar 4, 2012
    Messages:
    528
    Location:
    Katy, TX
    I own the 5 inch version. Great gun, you won't be disappointed if you buy one. I think it's a great bang for the buck if you are looking for a 1911.
     
  24. JRWhit

    JRWhit Member

    Joined:
    Sep 13, 2012
    Messages:
    971
    Location:
    MO
    Great gun for the money.
    Compared to my SD 1911-A1. The SD has a tighter slide fit and is and has no clank to it, but the Ruger is hands down a better shooter out of the box. Trigger is fantastic for an out of the box gun at that price and accuracy is quite good as well. Its a great buy in my opinion. Looking to at some point add the commander.
     
Thread Status:
Not open for further replies.

Share This Page