The Scout Project is COMPLETE! With pics, of course

Status
Not open for further replies.

hillbilly

Member
Joined
Jul 10, 2003
Messages
3,165
Location
Iowa
The journey started two years ago is physically complete.

Now, I just have to get to the range and sight it in.

Oh joy!

It's an Ishapore Enfield that somebody chopped into a faux-jungle carbine.

I bought it in that condition two years ago, ($150, including shipping on GunsAmerica) with the express goal in mind to make it into a pseudo-scout.

This year, I finally had the cash on hand.

To that $150 I added $75 worth of XS Scout mount and epoxy kit, a $200 Leupold Scout scope and rings I got from THR member Sparky, and a $65 Ramline Synthetic stock from HoosierGunWorks.com

I could have gone with a cheaper scope, but one lesson I learned long ago is that scrimping on optics is never a real savings anyway. If you're gonna put glass on it, put quality glass on it.

Getting the rear and front sights knocked off and the extractor spring replaced was $30 more.

One thing about the sights. The front sight-flash hider combo looked like a genuine #5 part, but when the smith put a torch to it to soften the solder, the whole freakin' thing melted away like butter. It was a cheap, aftermarket aluminum piece.

Grand total was $520, or less than half what a Cooper Scout retails for. And Savage Scouts, which aren't made any more, go for about $400 for the rifle alone--that's before scope and rings.

And considering I now have a Pseudo-Scout (doesn't have backup ghost ring sights, so not a "real" scout according to Jeff Cooper) that's in .308 that has a 12 round box magazine on it.

Yee-haw, indeed.
 
Last edited:
From the side...

The gray patch on the stock about halfway down the scope mount is where I got a little happy with the rotary tool and I was inletting the synthetic stock to make room for the scope mount.

I boogered it, and then sanded out the boogered part.

I plan on eventually doing some sort of paint job on the whole thing anyway.....Not a garish camo job, but maybe a coating of misty light green, ala military DMR rifles.
 
Last edited:
Oh yeah, almost forgot.

I found a local sporting goods store having a 50% off non-gun, non-bow, non-scope items, so I got a pair of Butler Creek flip caps to put on the scope for $7.

So, my grand total is now $527.

In this pic, I tried to get a shot down the IER scope so you can see the reticle.
 
Last edited:
The Enfield Scout looks GREAT. I am working on one myself in .303. I started with a barreled receiver(the barrel was a stove pipe) and collected a decent barrel and all of the other parts, XO mount etc. I hope that it turns out half as nice as yours. I can't wait to hear how your rifle shoots.

Drue
 
Very good looking rifle. I really like the scout rifle concept. The Leupold scope and that XS mount work well together as the scope is low over the bore just as it should be.

The Enfield action is one of the fastest bolt actions there is. Let us know how she shoots. I think you have a winner!
 
We oughta do something like a Homemade Scout Rifle postal match.

100 yards. 10 shots. One slow fire set of 10, and then one "fast-as-you-can" string of fire.

Hmmm.....

hillbilly
 
I thought the stock looked weird in that pic, too.

I've looked at it and looked at it. But it looks and feels straight when I shoulder it.

I think it's because where the stock fits into the metal on an old Enfield, it's not a straight line.

The old wooden stock I took off it also has more of a hump on the right hand side.

I think it's that hump combined with weird camera angle.

Or maybe it is slightly out of line and I just can't see it?
 
Here is a pic of the old wooden stock I took off it.

You can see that non-straight, weird humped feature I was talking about.
 
Last edited:
Scope mount was very easy.

Easy to follow instructions and easy to use epoxy kit from XS Sight Systems (formerly Ashley Outdoors).

The hardest part was inletting the forearm to make room for the increased diameter of the scope mount.

My garage is still covered with small black polymer shavings from the wrath of the rotary tool.

Bzzzzzzzzzzzzzt!

hillbilly
 
Great Project! I like it alot. Look forward to hearing a range report. Also, I dont think your scout project is a pseudo scout at all, but might qualify as a scout. I think the backup sights are optional or a alternative to a scope. Since your already good on caliber, as long as your under length and weight you should be ok. Plus, IF im wrong, and it is still considered a pseudo scout, it doesnt matter as that is one awesome and handy looking rifle :).
 
Overall length is 38.25 inches.

Weight, according to my bathroom scales, is 8 pounds.

I had to do the old trick of weighing without rifle and then weighing with rifle and subtracting.

hillbilly
 
I won't be able to get to the range until later this week.

I keep practicing my fast target aquisition and dry firing with it.

My plan is to bech rest it and get it sighted in for point-blank to 300.

According to a website I found, that means I will need to get it group about 2.8 to 3 inches high at 100 yards.

After bench work and sight-in, I will then put up typing paper sheets at 100, 200, and 300 and try some faster shooting at those.

I figure I can snap shoot the 100 yard targets fairly easily, but the 200 and 300 will require much slower work.

But I will post pics and results after I get to the range. Maybe tomorrow or Wednesday.

hillbilly
 
Status
Not open for further replies.
Back
Top