General Tso
member
I don't want to lube case necks anymore. Is Dillon the only die that comes with a carbide neck sizer?
DIESZR-C-10 SIZER DIE BODY (SPECIFY CALIBER)
$28.88
005181 223 Rem - Full Length Sizing Die $46.00
CUSTOM neck honing of Forster FULL LENGTH SIZING or NECK SIZING DIE to your specification. We custom hone the inside neck diameter by using a diamond stoning process. We enlarge the inside diameter to prevent over-sizing of the case neck due to thick neck walls. You may require this service for two reasons: 1) If you use some brands of brass cases, such as Norma or Lapua, which have thicker neck walls. 2) If you do not intend to outside neck turn case necks that have thickened after repeated firings. Please specify desired inside neck diameter. Note: 1) No more than .008" stock removal from your existing die neck diameter is possible. 2) Honing is done in increments of one half thousandth of an inch (.0005"), meaning that your specified inside diameter must be either.XXX0" or .XXX5".
$12.00 plus actual return UPS shipping cost & insurance Please allow 1-3 weeks.
918v
I split-up the sizing operation into two steps: Redding body die, then Lee Collet Neck die. I don't like to lube the inner neck either.