AJC1
Member
Good to know, learn new stuff all the time.I use my Magnetospeed on pistols all the time. But, you have to buy a $25 adapter and the pistol has to have a pic rail.
Good to know, learn new stuff all the time.I use my Magnetospeed on pistols all the time. But, you have to buy a $25 adapter and the pistol has to have a pic rail.
Get a cheap one to start... your first one is basically doomed...
you have a link for the pistol adapter? I have the Magneto Cheapo SporterI use my Magnetospeed on pistols all the time. But, you have to buy a $25 adapter and the pistol has to have a pic rail.
800 Pounds Sterling…. thats like $800 American Paper money! EXPENSIVE
No, 800£ more like $950 USD and that's very expensive for sure! It's about the same 800 in Euros. (807€)800 Pounds Sterling…. thats like $800 American Paper money! EXPENSIVE
No, 800£ more like $950 USD and that's very expensive for sure! It's about the same 800 in Euros. (807€)
I have no doubt lol...Give it about 6 more months. £ is weakening pretty rapidly.
They have guns in UK?Give it about 6 more months. £ is weakening pretty rapidly.
They have guns in UK?
edit… Euros,
were you from?
Techie lol… should have known you would be interested in a Doppler Chrono that links to your phone… lolMe? I’m from US. But I work in tech/biz dev in global orgs, so I watch exchange rates relatively often. Euros hit parity with the dollar, what, 10 days ago, and Pounds Sterling are on a steady decline, headed for parity if this keeps up, within 6-9mos. Magic time for me, as my ops budget for the year is approved and defined in CHF, so wearing European currency means my ability to spend in the US is going up!
Techie lol… should have known you would be interested in a Doppler Chrono that links to your phone… lol
Move Down to Seattle and I’ll get you a over payed PM job and we can go shooting!Not a techie, not by a long shot. But such is my cross to bear - can’t say “technology development” in modern company and have anyone picture anything but cellphones and tablets. I’ve worked in a few different industries, did a little in munitions development and armor in my early career, in and out a bit in polymers/biocomposites, but have spent most of my career in renewable energy and biochemistry, with tentacles reaching out into food and feed industries. Largely trying to drive value downstream for American Agriculture products.
My software tech basis is actually exceptionally weak - even for EI&A in process development, I’ve typically always punted to a few exceptionally skilled Electrical and Automation engineers and resources I’ve had on hand, so I’ve never had to bother to develop that part of my skill set, and now being almost wholly on the business side, I’ll never be in a position to need to develop it - not beyond knowing when I’m being overcharged or underserved in a project.
Magnetospeed sells the adapter, but sorry, it doesn't work with a Sporter.you have a link for the pistol adapter? I have the Magneto Cheapo Sporter
what a SCAM! Magneto wants you to buy the deluxe kit. I bet I can get that adaptor to work in a SporterMagnetospeed sells the adapter, but sorry, it doesn't work with a Sporter.
I’m still trying to figure out a way to use a magnetospeed on a 1911. Got any tips?I shot my chrono the 1st day. Return it to Amazon because it was defective. Bought a Magneto Speed to replace it. Works great
I was thinking of mounting the sensor rod on a vice, level it, and somehow not shoot the sensor rodI’m still trying to figure out a way to use a magnetospeed on a 1911. Got any tips?
I was thinking of mounting the sensor rod on a vice, level it, and somehow not shoot the sensor rod
I’m going to try this with a wood vice!This is the trick. Build a fixture for the bayonet, set the muzzle against the fixture, and bang. The pistol recoils out of the fixture, and a guy has to mind his barrel direction, but it actually works pretty well. I’ve done it with a simple camera tripod and a clamp for the bayonet, back when I had my Sporter. I have the V3 now, and rather just use a LabRadar for pistols instead of using my pic mount - most of my pistols simply don’t have pic rails. But the bayonet fixture trick does work.
Would that be like, a statue of a naked chick carved out of wood? I don't see how that would hold the bayonet. Unless you laid it between her....nevermind.I’m going to try this with a wood vice!
You have the best imaginationWould that be like, a statue of a naked chick carved out of wood? I don't see how that would hold the bayonet. Unless you laid it between her....nevermind.