I Want A Kimber Micro 9 But.....

Status
Not open for further replies.
I guess I’ve had great luck with my Kimbers, my guns haven’t had any issues to date (All 9mm; Stainless Target II, Ultra Carry II, Micro 9).

The Micro 9 is, like all of my other small-framed 9mm guns, a bit snappy in recoil and not a ton of fun to shoot a lot. It has been fairly accurate in my hands at reasonable SD distances; better for me than my Ruger SC9 and Glock 43 but not better than my Glock 43x or Ultra Carry II.

I only have one physical issue with it and one observation/word of warning for a new Micro 9 owner.

My physical issue involves my right hand thumb knuckle rubbing on the safety lever and getting a blister. (I put 150 through the gun the first time I shot it so I could get used to the magazines.) It is just the way the gun sits in my hand, after 125 rounds or so the skin got rubbed off. I don’t know if most folks will put that many rounds through one at one time, but for me it just touched my knuckle in a soft spot.

The observation involves the magazine floorplate and how it is oriented. There is “overhang” of the floorplate to the rear of the mag body, not to the front like other auto magazines. For people like me who have trained for decades retrieving magazines while keeping eyes on the threat (orienting by feel) the Micro 9 magazine will take a good bit of getting used to.

Micro 9 mag:
8A2AE9D1-DBB6-48AB-8F27-E4148FBDB40C.jpeg

The usual auto pistol mags:
A11FB7ED-B9BC-483B-B3D3-0ADEED6F1CEB.jpeg

Other than the two things that I observed, I feel the Micro 9 is a viable option for those who prefer a SA 1911-ish handgun for carry.

Stay safe.
 
@Riomouse911 ...I have a Micro 9 Rapide that has an extended mag well that provides for a more conventional mag. I have issues with the safety too.. it protrudes just enough that I find myself bumping it on frequently. I haven't gotten any blisters from it though. It's a little gun that require a little different handling. I find mine extremely accurate.
 

Attachments

  • IMG_20210319_200215739.jpg
    IMG_20210319_200215739.jpg
    123.5 KB · Views: 8
@Riomouse911 ...I have a Micro 9 Rapide that has an extended mag well that provides for a more conventional mag. I have issues with the safety too.. it protrudes just enough that I find myself bumping it on frequently. I haven't gotten any blisters from it though. It's a little gun that require a little different handling. I find mine extremely accurate.
The Rapide models are some good looking pistols, yours is a beauty!
:thumbup:
Mine is the basic stainless/rubber grip SHOT show special they offered a few years ago. It was sold to me NIB at about 1/3 off the regular selling prices for the standard models, so I just couldn’t say no.


A15A942A-AFD3-49D7-9CF2-CF3DBEED3245.jpeg 257B0CF0-B7AA-4CF4-A8D3-68935B2346C8.jpeg

As I posted above it has been reliable and small-pistol accurate at SD ranges. I think the OP will be well served if he chooses to pick one up.

Stay safe.
 
Last edited:
I find my Sig P938 to be very accurate for its size. It will shoot tight groups out to 15 yards when shooting free hand. Yes you have to practice more to be good with a micro pistol. But going with the Sig P938 or Kimber Minor 9 wasn't much different to me since I have shot and owned the Star Model D and had a Colt Pony years ago. Plus they aren't much smaller than the Star Firestar pistols I own. The 9mm Firestar M43 is 7 rounds and the 40 S&W M40 is 6 rounds.
 
My physical issue involves my right hand thumb knuckle rubbing on the safety lever and getting a blister. (I put 150 through the gun the first time I shot it so I could get used to the magazines.) It is just the way the gun sits in my hand, after 125 rounds or so the skin got rubbed off. I don’t know if most folks will put that many rounds through one at one time, but for me it just touched my knuckle in a soft spot.

I can see this can be an issue, but everyone holds a gun a bit differently. I do not have a problem with the safety lever rubbing on my thumb when shooting a Micro 9.

That is not to say that I do not have issues gripping other revolvers. Single action revolvers wreck the heck out of my knuckles with the trigger guard hitting my knuckles. I've read lots of suggestions, I just cannot come up with a viable solution for my shooting style.
 
Last edited:
I can see this can be an issue, but everyone holds a gun a bit differently. I do not have a problem with the safety lever rubbing on my thumb when shooting a Micro 9.

That is not to say that I do not have issues gripping other revolvers. Single action revolvers wreck the heck out of my knuckles with the trigger guard hitting my knuckles. I've read lots of suggestions, I just cannot come uo with a viable solution for my shooting style.
Ya, each gun is different. The Micro 9 safety just hits my thumb in the wrong spot for extended shooting sessions. :(

I also get a blister from Glocks. Where the triggerguard meets the frame, the right edge of the triggerguard rubs the side of my middle finger. (I use a high and tight grip.) All of my Glocks will get a touch of sanding with a Dremel to improve that area.

The Airweight S&W 642-442 revolvers I have do rap my knuckle with every shot. Even wadcutters hurt after a couple of cylinders.

My hardest-kicking SA revolvers are an old model Vaquero.45 Colt and a .41 Mag Blackhawk. These guns rock back on me with gusto when stout loads are fired, but my knuckles have (so far) avoided the
rap from the triggerguard.

Stay safe.
 
F62B78EA-E187-4468-9DEA-26629905A6B1.jpeg A buddy of mine has the Kimber Black Ice and it has been flawless. It fires and feeds anything including lead hand loads with no problems.
And it’s pretty
 
My friends Bel Air came back from Kimber. About a month turn around.

we shot 100 rounds through it. Seemed fine. She likes it.
 
Status
Not open for further replies.
Back
Top