Hello everyone, you helped me with my finicky springfield, and im thankful for that, but now im curious if anyone else has had this problem. Im currently using a springfield gi, tapered lip magazines, 16 lb recoil spring, the extracter tuned and fit, and chamber and ramp polished. The only thing is after about 120 or so firings of my hand loads in a row without cleaning, I get a three point jam, case about three quarters out of the chamber. Its almost always on slide lock reloads. Im wondering if the load is just too dirty. If I push hard on the slide, or drop the magazine it will usually chamber just fine. the load is 5.5 grs bullseye, cci/winchester large pistol primers, Precision Delta 230fmj (great bullets!) loaded to 1.262, mixed brass I have noticed that the problem is more common when a shorter oal is used. The last one measured at 1.254 after the jam. Occasionally the ogive is a little off and the bullets get seated shorter or longer than normal. Only jammed one time on factory ammo... some plated federal from wallmart that didn't seem high quality, but at 17$ a box this year I figured why not, same jam thou. Any thoughts would be great, thanks!