dfariswheel
Member
- Joined
- Dec 26, 2002
- Messages
- 6,657
A&PMechanic
Here's a link to an online Marlin Owner's manual.
You can also contact Marlin for a hard copy.
http://stevespages.com/pdf/marlin_39a39m.pdf
I'd suggest field stripping the rifle and giving it a good clean and some fresh lube.
When disassembling, COCK THE HAMMER ALL THE WAY BACK before separating the receivers halves. Otherwise the bolt, hammer, and receiver can get damaged.
Also pay attention to the part about locking the ejector down while cleaning the bore.
Here's a link to an online Marlin Owner's manual.
You can also contact Marlin for a hard copy.
http://stevespages.com/pdf/marlin_39a39m.pdf
I'd suggest field stripping the rifle and giving it a good clean and some fresh lube.
When disassembling, COCK THE HAMMER ALL THE WAY BACK before separating the receivers halves. Otherwise the bolt, hammer, and receiver can get damaged.
Also pay attention to the part about locking the ejector down while cleaning the bore.