What have you done in the reloading room today

[Horskinator]

Been a little while since I posted but I recently shot a ladder of 338wm 210gr Barnes TTSX over some IMR4350 and found a load I like and will be taking to Africa in June. Made some more practice rounds today and will be using some new brass for the ammunition going to Africa over the next couple weeks.

 

[Walkalong]

Priming Dasher cases.



Edit: All done.

 

[GeoDudeFlorida]

I’m flabbergasted, stunned, amazed, dazed and confused! My Midway USA bullet order arrived. Intact! No spilled bullets, no broken boxes and nothing crushed.

Way to go, Larry!

Now to find room for them.

 

[AJC1]

Smashed 200 rounds of 30-30 together with 15.8 grains of bluedot at 2.550. Grt says it's a 31kpsi load. 16.2 also shot well but I am using these for fun cheap range practice for shooting offhand. Got my 1k order of berrys...

 

[GeoDudeFlorida]

Smashed 200 rounds of 30-30 together with 15.8 grains of bluedot at 2.550. Grt says it's a 31kpsi load. 16.2 also shot well but I am using these for fun cheap range practice for shooting offhand. Got my 1k order of berrys... View attachment 1205355View attachment 1205356

Just loafing around, eh?

 

[IALoder]

Ran a load of brass in the wet tumbler, it's drying now. Also got some Norma .223 brass out to keep playing with 77smks in my WOA barrel, and figured out the ladders I want to try with AR Comp and Staball Match.

 

[AJC1]

Just loafing around, eh?

We all have our slow days....

 

[Soonerpesek]

I’m flabbergasted, stunned, amazed, dazed and confused! My Midway USA bullet order arrived. Intact! No spilled bullets, no broken boxes and nothing crushed.

Way to go, Larry!

Now to find room for them.

Hopefully they were the ones YOU ordered….

 

[Soonerpesek]

Got 85 cases of 45-70 in the dry tumbling device from chrono testing the other day along with a paltry 50 .38 SPL cases, not from testing, just absolutely fun to shoot with the hush hush barrel contraption engaged…

 

[Soonerpesek]

….and I ordered 500 more 500gr .460” RNFP coated bullets from T&B Bullets….. FOR the reloading room…

 

[AJC1]

….and I ordered 500 more 500gr .460” RNFP coated bullets from T&B Bullets….. FOR the reloading room…

Put those on a sturdy shelf, they weigh a lot....

 

[Captain*kirk]

Brushed primer pockets, deburred, chamfered, tumbled, brushed again.

Need to expand and prime.
View attachment 1205313

View attachment 1205314
View attachment 1205315

Well, that's one way to get-r-dun in a hurry!

 

[AJC1]

I’m flabbergasted, stunned, amazed, dazed and confused! My Midway USA bullet order arrived. Intact! No spilled bullets, no broken boxes and nothing crushed.

Way to go, Larry!

Now to find room for them.

I wasn't so lucky, berry's all over the big box with the other trinkets. Any chance they will start using the costo plastic containers

 

[Yamifrk]

Just loafing around, eh?

Maybe those are proof loads.

 

[.45Coltguy]

Loaded up 20 rounds of 30-30. 34.0gr Win 748, 150gr Rem Cor-Lokt bullets, R-P cases and Fed mag primers. No pic, it's the same set-up I use for everything else.
Time to head to the desert soon.

 

[JmacD]

I ran off about 20 9mm rounds last night with the progressive.(Im liking it more and more! I’m also disliking the plastic hopper more and more! I’m ordering the other one from dramworx after payday! Or maybe the next payday)
Reloading is probably going to be a little more intense next week. my daughter is gone next week, and reloading/shooting is my sole form of entertainment (other than being a bookworm, a beyond casual woodworker, and lots of church stuff) I’m pulling together info on a test ladder for 308 (and possibly 30-06)with 180 grain ballistic tips.

I also have my dad’s 22 torn apart on my bench to get back together. Compressing the springs with one hand and putting stuff back together with the same hand at the same time is a little on the complicated side.

 

[.45Coltguy]

….and I ordered 500 more 500gr .460” RNFP coated bullets from T&B Bullets….. FOR the reloading room…

T & B bullets. That fella in Oregon makes some fine bullets. Use 'em a lot also.

 

[Walkalong]

Loaded five more rounds at 31.4 that looked good in Rd 3 of testing. Shot them a bit ago. Great numbers. 8208 in Dasher of course.


Have plenty of cases to load for the match now. 135 minus five plus the 52 that were already prepped. Here are the 135 -5.

 

[Charlie98]

No spilled bullets, no broken boxes and nothing crushed.

That's one in a million... you need to go buy a lottery ticket the way your luck is! I pretty much quit buying bullets from Larry... for that reason.


Got 300 new WW .45ACP cases from another THR member, so I opened those up, put them in a bin, and tagged them.

Rounded up 2 bottles of powder that are going to another THR member... W244 and a partial pound of IMR4227. He wants Magnums... who am I to say no?

Also unboxed some AR build parts for a lower I picked up last week... all those tiny pins and springs!

 

[AJC1]

Next batch in progress.... once the ammo can is full with room for a desiccant I'm done for a while....

 

[GeoDudeFlorida]

That's one in a million... you need to go buy a lottery ticket the way your luck is! I pretty much quit buying bullets from Larry... for that reason.


Got 300 new WW .45ACP cases from another THR member, so I opened those up, put them in a bin, and tagged them.

Rounded up 2 bottles of powder that are going to another THR member... W244 and a partial pound of IMR4227. He wants Magnums... who am I to say no?

Also unboxed some AR build parts for a lower I picked up last week... all those tiny pins and springs!

They got me with free shipping and 20% off direct prices. I really like the Speer and Hornady soft swaged LRN for .38Spl. My old police revolvers are regulated to high speed 158’s perfectly. Under 850fps and over 750fps is the sweet spot.

 

[irishlad]

Loaded five more rounds at 31.4 that looked good in Rd 3 of testing. Shot them a bit ago. Great numbers. 8208 in Dasher of course.
View attachment 1205431

Have plenty of cases to load for the match now. 135 minus five plus the 52 that were already prepped. Here are the 135 -5.
View attachment 1205432

Great ES and SD. Did ya use the app?

 

[AJC1]

Today's lot finished, charge Master said 122. I think if I do 100 tomorrow the box will be full.

 

[irishlad]

Hung a couple of signs.

 

[3sport]

Hung a couple of signs.

View attachment 1205471

Nice! Looks great to me. I am a fan. I am waiting for a Peters High Velocity tin sign to arrive on Saturday.



Put up four tin signs recently on my new relocated to the garage bench. The new Peters High Velocity shot shell sign will go on the top left when it arrives. Still have to pull out some gun/reloading storage items out of the bins and get the two top shelves 'Reloading Bench" organized. Almost there.



Out in my cabin (a Sunroom that I converted to a hunting/fishing cabin), I have a Peters Gun Dog sign that I put in a frame.
I really like some of these old tin sign reproductions. Peters reminds me of my late father. He was (mostly) a duck/rabbit hunter, and boxes of Peters High Velocity were always on his bench.